Five different colors to choose from
Aged Teak
American Walnut
Driftwood
Silver Maple
White Ash
The Appalachian decking system is built over a new, or existing, deck frame made from wood, or metal. It works great for elevated decks, docks, stairs, or installed on the ground.
Surface mounted clip to hold down the perimeter of the surface boards. This clip is fastened before mounting the board. (this clip is the same as the Single Fascia Clip)
Starter Clip
These are the primary deck/stair surface boards. They are fastened using the starter clip at the ends, then the grooved clip, which goes between the boards.
Grooved Board
Grooved Clip
Use to hold down all of the deck surface boards, except the edge.
Used on the exposed perimeter of the deck/stairs, as they have a finished edge. The one side is grooved, and held down using the groove clip. (the groove clip can hold three boards at the same time) The other side, has an internal groove, which is held down, using either the Starter Clip or the Edge Clip.
Edge Board
A side mounted clip to hold down the perimeter of the surface board. This clip is fastened after the board has been placed
Edge Clip
Get the
Appalachian
Sample Kit
Our Rain Through System
The kit includes small pieces of all five colors, shipping included for only $20.
Ready to Get Started?
Explore the resources below and start your outdoor living project.
